Access Controller
·
·
·
·
User Manual
91
You can set anti-passing back for card readers in multiple access controllers. You should swipe
the card according to the configured swiping card route. And only one person could pass the
access control point after swiping the card.
For the Cross-Controller Anti-passing Back” feature to operate iVMS4200 software must be
running at all times.
Click
Cross-Controller Anti-passing Back
to enter the Cross-Controller Anti-passing Back tab.
Setting Route Anti-passing Back
Purpose:
The route anti-passing back depends on the card swiping route. You should set the first card reader
and the card readers afterwards.
Steps:
3.
Check the
Enable Cross-Controller Anti-passing Back
checkbox to enable the function.
4.
Set the anti-passing back parameters.
Based on Card
Note:
The system will judge the anti-passing back according to the entrance and exit
records on the card.
1)
Select
Based on Card
as the anti-passing back mode in the drop-down list.
2)
Select
Route Anti-passing Back
as the rule.
3)
Set the sector ID.
4)
Click
Select Device
to select a device in the pop-up window for anti-passing back
authentication.
5)
In the Set Card Reader area, click the icon on the left of the card enrollment station
column to select the first card reader. The icon will turn to
.
Содержание 114-100
Страница 1: ...DS K2600 Series Access Controller User Manual Ness V1 0 ...
Страница 26: ...Access Controller User Manual 17 4 4 Connecting the External Alarm Device 4 5 Door Button Wiring Diagram ...
Страница 29: ...Access Controller User Manual 20 4 9 Fire Alarm Module Wiring ...
Страница 115: ...Access Controller User Manual 106 3 Click Save button to save parameters ...
