Nesco Jet Stream JS-1500, Руководство пользователя

Страница: 12 / 66

Before You Begin
Preparing Your Unit
• Before using your Jet-Stream Oven
™
for
the first time wash base, liner, lid and
racks in hot soapy water or run through
the dishwasher.
IMPORTANT - do not
put fan assembly in water.
• For best results, and longevity of your
liner and non stick racks cure before
using. Brush a light coating of vegetable
oil on the surfaces and then run unit
empty at 400˚ HIGH for three minutes.
IMPORTANT - do not brush oil on lid.
Assembling the Oven
• Notice that the lid (#8 pg. 8) has 4
nibs that correspond to 4 L-shaped
ridges (bayonette slots) in the fan
assembly (#1). They allow a snug,
precision fit and all 4 must be securely
locked together to prevent the lid from
releasing during use. You must take care
to assure that the lid is squared with the
fan assembly. We suggest you lay the lid
on a flat surface and insert the fan
assembly into the opening. Press gently
until the fan slides all the way in and
turn clockwise until locked into place.
Check for proper fit by jiggling the
assembly, there should be no movement.
The collar should be the same all the
way around. If your machine does not
close properly, the lid is probably not on
straight, remove it and repeat the
procedure. (see fig. A & page 10)
• Snap hinge pin assembly (#11) over
handle and leg of base (#13) as shown.
Then, insert the handle of the base into
slot in Hinge Pin Assembly. Note: If
done correctly, one of the base’s handles
will be covered or hidden by the hinge
pin assembly (see fig. B page 10)
• Slide fan assembly (#1) onto silver
hinge pin (#11) until firmly in place (see
fig. C page 11).
• Place liner (#12) in base of unit (#13)
and bottom rack (#10) on liner (#12).
Never operate unit without using the
liner (#12) as it may cause damage to
your counter top or other surface.
• Lower lid (#8) onto bottom base
(#13). Make sure lid is closed and seated
properly in the base. Check to see that
the fan is in the “OFF” position and plug
into electrical outlet.
• Place unit far enough away from wall
to assure free flow of air. Clear away any
objects on the counter top that may
obstruct airflow to the back of the unit.
• You are now ready to cook in your
new Jet-Stream Oven!
Fig. C
11