Neopost MaxiMailer HD Скачать руководство пользователя страница 8

Страница: 8 / 69

MaxiMailer HD Operator Manual

TeCHnICal sPeCIfICaTIOn

3.1 Machine rating sheet

CAUTION:

In order to ensure correct safety and operation, this machine must

only be installed and maintained by an authorized Service Engineer.

CAUTION:

Should any cover or safety interlock be damaged, the machine must

not be used until service repairs have been completed.

CAUTION:

This machine must be earthed

. The wire colours in the mains

power cord are:

(Green/Yellow 230v) (Green 115v) which must be connected to Earth (Ground).

(Blue 230v) (White 115v)

which must be connected to Neutral.

(Brown 230v) (Black 115v)

which must be connected to Live (Line).

CAUTION:

This machine is supplied with an unterminated mains cable for hard

wiring (for machines of 5 stations or more), or connection with a

suitable 16A plug/socket conforming to IEC 60309 (for machines up

to 4 stations).

CAUTION:

For continued protection against risk of fire, replace with same type

and rating of fuse. The fuse rating/type for this machine is :

T 6.3 A Amps 230Volts (Part No. 135-106).

T 10 A Amps 115Volts (Part No. 135-110UL).

Model Details:

Model Name:

MaxiMailer HD

Model Number:

DC32

Input Voltage:

230 Volts @ 50 Hz 115 Volts @ 60 Hz

Input current:

6.3 Amps

10 Amps

Sound Reading:

75dBA

(measured at a distance of 1 meter from the nearest cover and a height of 1.6

metres from the ground).

The use for this machine is for collating, folding and inserting documents into an

envelope.

The weight of this machine is:

290 kgs (unpackaged)

400 kgs (packaged, with accessories)

Based on a configuration 3 x Feeders and Tower Unit

Lifting or handling must only be carried out by competent persons using appropriate

means.

Содержание MaxiMailer HD






































































Результаты поиска

Содержание MaxiMailer HD

Отзывы:

Похожие инструкции для MaxiMailer HD

Бренды по названию

Популярные бренды

Neopost MaxiMailer HD, Руководство оператора

Результаты поиска

Содержание MaxiMailer HD

Отзывы:

Похожие инструкции для MaxiMailer HD

Бренды по названию

Популярные бренды