Neopost MaxiMailer HD Скачать руководство пользователя страница 23

Страница: 23 / 69

MaxiMailer HD Operator Manual

Press

barcode name

and edit the name as required, either by typing it or by

using the on-screen keyboard. Any changes made here will be reflected in the

Barcode list box when the Barcode screen is saved and exited.

The buttons below

name

relate to label settings and other non-BCS character

functions. These are briefly described below:

Definition mode:

Only ‘As printed’ is available.

number of characters in label:

Up to max. 25 for BCS system.

label machine control:

The type of control system the machine will use to

decode the label. Options are: Standard BCS (default) / Neopost 3 / Customer

ID 3 of 9 / Numeric 2 of 5 / Last page custom 1 / Custom control 2. For all

except Standard BCS, the Technical Support department must be consulted.

symbology:

The code type of the label being read. Options are Code 2 of 5 /

Code 3 of 9 / Code 128 / 2D Datamatrix.

Grouping:

Select whether the group mark is End of group, First of group

or Label on first page only (label printed on first page of group, but not

subsequent pages).

Good decode reads:

Set the maximum number of good reads required

before label is accepted. Set to low number if print quality is poor.

editing

the setup

name.

editing the

settings

for non-

bCs

characters.

From this screen you can edit the barcode or other ID label setup selected in the list box

(see 1.2) or press ‘New’ if creating a new setup. The setup name and all label settings can

be changed as required.

note:

settings shown may not all be available, depending on Label

Machine Control selected.

5.6 The barcode/label screen

Содержание MaxiMailer HD






































































Результаты поиска

Содержание MaxiMailer HD

Отзывы:

Похожие инструкции для MaxiMailer HD

Бренды по названию

Популярные бренды

Neopost MaxiMailer HD, Руководство оператора

Результаты поиска

Содержание MaxiMailer HD

Отзывы:

Похожие инструкции для MaxiMailer HD

Бренды по названию

Популярные бренды