Neopost MaxiMailer HD, Руководство оператора

Страница: 66 / 69

66 MaxiMailer HD Operator Manual
12. DOCUMenT ORIenTaTIOn Tables
Paper orientation on the feed hoppers will depend on fold type, accumulation tray, OMR/
Barcode and feed sequence. The example below shows how to reference the required
orientation from the tables. Note that for most applications, the LEDs on the rear edge of
the 3-plate folder will indicate the required orientation.
fold Chosen is top address ‘C’
fold.
1. Select configuration from table
1. Note column A (unshaded).
2. OMR or Barcode? If NO, use
table 2. If YES, use table 3 for
OMR, table 4 for Barcode. Daily
Post (table 5) is not an option for
this fold type.
see following page for tables
2 - 5.
3. For chosen table, use row
A (from step 1). This indicates
orientation, feed sequence
and read head position (where
applicable).
Note that for Daily Post, only
configurations in table 1, column
B can be used.
Fold generation requires:
Foldplate 1 set to 1/3rd paper
length Foldplate 3 set to 1/3rd
paper length
Preferred fold configurations are indicated bold and give correct address
orientation in window of standard envelopes.
Shaded areas denote folds that give
incorrect address orientation in window
of standard envelope. Reverse printing and/or non-standard window
envelopes may permit use.
note: For some complex jobs, not all paper trays may be loaded in the
same way.
example