Neon NCS10, Инструкция по использованию

Страница: 8 / 30

DEX ARA 01 – M /01 – Page 8/24
Periodical inspection
This fall arrester is a safety device, its working reliability
requires periodical inspections to ensure its level of
performance and strength.
The periodic inspection is mandatory once a year. The
frequency must be reduced in case of intensive use or use in
harsh environment. These periodical inspections can be
carried out only by the manufacturer or an authorized service
centre and with respect to the maintenance manual.
The user label must be read and understood by the user. The
label must be kept legible at all times.
ID and record card
An identification and record card like the model hereafter must
be filled in and kept to record essential information.
At the time of first use, the inspection sticker must be filled in
with the date of next inspection (1 year later)
Main Inspection and Monitoring Points:
These checks do not require disassembly of
the device. In case of doubt regarding the good condition of
proper operation of the device, return it to the manufacturer or
to its authorized service center for maintenance.
•
Condition of the fall indicator if present on the device
(located according to the table page 1 and condition
according to the diagram at the end of the notice)
•
General Condition:
Housing: Absence de deformation, dents, corrosion, good
condition of the assembly elements.
Identification: Readability of the references, instructions for
use and date of the next inspection.
•
Webbing:
Webbing condition: Absence of deformation, cuts, fraying
and fiber damage
Condition of the swivel anchoring ring
Automatic snap hook (if present): No deformation, free
movement of the latch and its locking mechanism.
•
Triggering:
A sharp “yank” on the fall arrester lanyard should lock the
release and a rattle should be heard that indicates the
triggering of the locking pawl regardless of how much the
lanyard has unwound.
•
Retraction of the Webbing :
The retraction of the lanyard must take place without
stopping at any level of unwinding.
RECORD AND ID CARD FOR
THE EQUIPMENT
Ref. Card / Name of the User:
Name of the Product:
Retractable Type Fall Arrester
Manufacturer:
Telephone:
Fax:
Internet:
E-Mail:
Model and Type: Brand Name: ID Number:
Year of Manufacture: Date of Purchase: Date of First Utilization:
Notes:
GB