Dispensing
Faucet
Product
(3/8")
NOTE:
For refrigerator water
dispenser or ice maker hookup,
Tee into 3/8" blue tubing to
dispensing faucet.
Holding Tank Shut-Off Valve
(Open Position)
Floor
Polytube Tee
(3/8" x 1/4"
Black)
In-Line Activated
Carbon Post-Filter
Feed Water
Saddle Valve
(Cold Water Line
Only Not Included)
Tank
(3/8" White)
For cover with optional water quality monitor
see exploded view at the end of this manual.
Cover
RO Manifold
Drinking
Water Holding
Tank
Mount Holding Tank
On Shelf Or Strap Between
Floor Joists
(Shelf or straps not included)
Stage 3
Activated
Carbon
Post-Filter
Housing
Stage 2
Reverse
Osmosis
Membrane
Housing
Stage 1
Sediment
Carbon
Pre-Filter
Housing
Drain
(1/4" Black)
Feed
(1/4" Orange)
(Blue)
(Blue)
(White)
1" Air Gap Required
Basement
Floor
PLEASE NOTE:
If Air Gap in faucet is not used in
basement installations, a proper Air Gap must be
created. Please check with local plumbing codes.
See example above.
4
SECTION I. INTRODUCTION
OPTIONAL RO-4300RX BASEMENT INSTALLATION DIAGRAM (FIGURE 2)
