Using Advanced Features 107
Automatic Reconnection Feature of Connection Entry
When all the connected sessions are terminated, Terminal Connection Manager reconnects the
connection entry which has been set in [Autostart] of the [Startup] option.
By using this setting for the connection entry to be used, the configured connection entry will be
connected automatically when all the connection entries currently connected are terminated.
Setting Procedures
Take steps below to specify the entry for Auto reconnection option.
1.
Select [Configure] tab in the [Terminal Connection Manager] screen.
2.
Select the connection entry to be configured, and then press the [Startup...] button.
3.
Select [Automatically start the selected connection at startup.] from the [Startup Options]
in the [Connection Startup] dialog.
4.
Check the [Reconnect if all the connected sessions terminate.] check box.
5.
Enter the waiting time to connect the configured connection entry after all connection
entries are terminated in [Waiting time till reconnection]. (0 to 3600 seconds)
6.
Press the [OK] button.
Figure 3- 5 Connection Startup