NEC SigmaBlade N8406-040(F), Руководство пользователя

Страница: 158 / 206

ISL R_RDY Mode .. .. .. .. .. .. .. ..
RSCN Suppressed .. .. .. .. .. .. .. ..
Persistent DisableON .. .. .. .. .. .. ..
NPIV capability ON ON ON ON ON ON ON ON
QOS E_Port AE AE AE AE AE AE AE AE
Mirror Port .. .. .. .. .. .. .. ..
Rate Limit .. .. .. .. .. .. .. ..
Credit Recovery ON ON ON ON ON ON ON ON
Fport Buffers .. .. .. .. .. .. .. ..
Port Auto Disable .. .. .. .. .. .. .. ..
where AE:QoSAutoEnable, AN:AutoNegotiate, ..:OFF, NA:NotApplicable, ??:INVALID,
LM:L0.5
ALE044120T2:admin>
IMPORTANT:
„ The port status display also includes the information on the ports unavailable to
N8406-040. However, this is not an error.
3.
The port data rate can be changed in the following two ways.
Select either of the ways depending on the use of the 8G FC Switch.
Changing the rates of all ports at a time
Type "switchcfgspeed x" to change the port data rate.
Value "x" is a new port data rate.
8 for 8G bps, 4 for 4G bps or 0 for Auto Negotiate
ALE044120T2:admin> switchcfgSpeed 8
ALE044120T2:admin>
NOTE:
„ The port data rates of all external and internal ports of an 8G FC Switch can be
changed at a time.
Changing data rates in ports
Type "portcfgspeed x y" to change the data rate of a specific port.
Value "x" is the number of the port whose data rate is to be changed.
N8406-040: internal ports 1 - 8 / external ports 17 - 20
N8406-042: internal ports 1 - 16 / external ports 17 - 23 and 0
Value "y" is a new port data rate.
4 for 4G bps or 2 for 2G bps
ALE044120T2:admin> portcfgspeed 17 8
ALE044120T2:admin>
NOTE:
„ The information on each port on the 8G FC Switch can be changed individually.
- 158 -