NEC SigmaBlade N8406-040(F), Руководство пользователя

Страница: 127 / 206

(2) External Ports
The SFP+ ports enable the 8G FC Switch to connect with fibre channel devices.
The 8G FC Switch is equipped with eight SFP+ ports. However, available ports vary depending on
the type. See the table below for the available ports.
Available/unavailable
External Port
N8406-040 N8406-042
Port 17 - 20
√ √
Port 21 - 23 –
√
Port 0 –
√
IMPORTANT:
„ The SFP+ module can be installed on an unavailable SFP+ port. However, the
SFP+ module cannot connect the 8G FC Switch with a fibre channel device.
(3) Internal Ports
The internal ports allow the 8G FC Switch to connect to fibre channel controllers inserted to
Mezzanine slots on the CPU blades in a Blade Enclosure (SIGMABLADE).
The 8G FC Switch is equipped with 16 internal ports. However, available ports vary depending on
the type. See the table below for the available ports.
IMPORTANT:
„ The slot number of the CPU blade to which a specific internal port is connected is
fixed. Changing the number is not allowed. For details, refer to the User’s Guide of
the Blade Enclosure (SIGMABLADE).
In the case of using a CPU blade which uses only one CPU blade slot or two CPU blade
slots located side by side:
z In the case of SIGMABLADE-M
Available/unavailable
Internal Port Connected CPU blade
N8406-040
Port 1 Slot 1
√
Port 2 Slot 2
√
Port 3 Slot 3
√
Port 4 Slot 4 √
Port 5 Slot 5
√
Port 6 Slot 6
√
Port 7 Slot 7
√
Port 8 Slot 8
√
Port 9 – Slot 9
Port 10 – Slot 10
Port 11 – Slot 11
Port 12 – Slot 12
Port 13 – Slot 13
Port 14 – Slot 14
Port 15 – Slot 15
Port 16 – Slot 16
- 127 -