NEC POWERMATE ES Series, Инструкция по обслуживанию и справочник

Страница: 75 / 132

System Boards 4-5
The system power must be off before removing the cover and
changing a jumper setting.
3. Remove the system cover (see “System Cover Removal” in Section 3).
4. Remove the diskette drive to access the jumpers (see “Diskette Drive Removal” in Section 3
for procedures).
5. Locate the appropriate jumpers on the system board that require resetting (see the preceding
figure “System Board Jumper Locations”).
6. Move the appropriate jumper(s) for the application, as shown in the following figure.
Setting System Board Jumpers