NEC POWERMATE ES Series, Инструкция по обслуживанию и справочник

Страница: 38 / 132

System Configuration 2-15
Advanced Menu - Power Management Setup
Menu Item Settings (default is bold)
RTC Alarm Date 15, Every Date
Sets the day that the system boots up (when Resume on RTC Alarm
is Enabled).
RTC Alarm Hour
12, 1-00
Sets real time clock alarm hour (when Resume on RTC Alarm is
Enabled).
RTC Alarm Minute 30, 0-59
Sets real time clock alarm minute (when Resume on RTC Alarm is
Enabled).
RTC Alarm Second 30, 0-59
Sets real time clock alarm minute (when Resume on RTC Alarm is
Enabled).
Advanced Menu - Plug and Play Setup
Menu Item Settings (default is bold)
Plug and Play
Aware O/S No, Yes
Select No to allow the BIOS to initialize any add-on boards (Windows
NT only). Select Yes to allow the operating system to initialize any
add-on boards (Windows 98 and Windows 2000).
Clear NVRam No, Yes
Select No to prohibit clearing of NV Ram.
Primary Graphics
Adapter Add-on VGA, Onboard VGA
Select Onboard VGA if VGA is integrated on the system board.
PCI VGA Palette
Snoop Disabled, Enabled
Set to Enabled to enable PCI VGA palette snooping.
DMA Channel
0, 1, 3, 5, 6, 7
PnP, ISA
Permits configuring the DMA channels either by Plug and Play or by
ISA.
IRQ 3, 4, 5, ,7, 9,
10, 11, 14, 15 PCI/PnP, ISA
Permits configuring the interrupt requests either by PCI/Plug and Play
or by ISA.
Reserved Memory
Size
Disabled, Enabled
Select Enabled to reserve a non-writeable zone in memory.
Reserved Memory
Address D0000
Defines the non-writeable zone in memory.