NEC POWERMATE ES Series, Инструкция по обслуживанию и справочник

Страница: 35 / 132

2-12 System Configuration
Advanced Menu - Advanced CMOS Setup
Menu Item Settings (default is bold)
View DMI Event Log Status only. Press Enter to view.
Clear all DMI Events
Logs No, Yes
Selecting No prevents clearing out the DMI events logs.
Event Logging Enabled, Disabled
Selecting Enabled permits event logging.
Mark DMI Events as
Read Press Enter (Yes/No)
Press Enter to mark DMI event log as read.
Quick Boot
Enabled, Disabled
When Enabled, the BIOS does not test system memory above
1 MB or wait for ready signals, allowing a quick boot.
Delay for Hard Drive
(seconds) 3, Disabled, 1 -10
Selects the amount of time for hard drive delay.
1st Boot Device Floppy, Disabled, IDE-0, IDE-1, IDE-2, IDE-3,
LS-120/Zip, ATAPI Zip, CDROM, SCSI, Network
Sets the diskette drive as the first boot device.
2nd Boot Device
IDE-0
Sets the second boot device.
3rd Boot Device CD-ROM
Sets the third boot device.
Try Other Boot
Devices Yes, No
Select Yes to cause the system to try to boot from other boot
devices if there is a boot failure. Selecting No causes the boot to
be carried out from selected devices.
Floppy Access Control Read-write, Read-only
Select Read-write to allow the diskette drive to have read-write
capabilities.
S.M.A.R.T. for Hard
Disks
Disabled, Enabled
Select Enabled to use the Self Monitoring Analysis and Reporting
Technology (S.M.A.R.T.) for reporting a possible problem with an
IDE device. After receiving the warning, the BIOS alerts you to the
problem.
Boot-up Num-Lock
On, Off
Select Off to lock the numeric keypad on boot up.