NEC POWERMATE ES Series, Инструкция по обслуживанию и справочник

Страница: 39 / 132

2-16 System Configuration
Advanced Menu - Peripheral Setup
Menu Item Settings (default is bold)
Onboard AC’97
Audio Enabled, Disabled
The Enabled setting allows use of onboard sound.
Onboard AC’97
Modem Enabled, Disabled
Onboard modem not available.
Onboard LAN Enabled, Disabled
Select Enabled to allow use of onboard local area network
Onboard Serial
Port A 3F8/COM1, Auto, Disabled, 2F8/COM2, 3E8/COM3, 2E8/COM4
Defines serial port A base I/O address.
Onboard Serial
Port B 3F8/COM1, Auto, Disabled, 2F8/COM2, 3E8/COM3, 2E8/COM4
Defines serial port B base I/O address.
Serial Port B Mode
Normal, 1.6us, 3/16 baud, ASKIR
Select Normal to set the port for normal use.
IR Duplex Mode
Half Duplex, Full Duplex
This option allows the Infra red Duplex mode to function in one
direction at a time (Half Duplex) or both directions (Full Duplex).
Onboard Parallel
Port 378, Auto, Disabled, 278, 3BC
Select Auto to allow the BIOS to automatically assign the parallel port
to an available parallel port IRQ.
Parallel Port Mode ECP, Normal, Bi-Directional, EPP
Use this mode to choose the operating mode of the onboard parallel
port.
EPP Version
N/A, 1.9, 1.7
Use this setting (1.7 or 1.9) to select the EPP version.
Parallel Port IRQ
7, 5
Allows setting of the interrupt request (IRQ) for the parallel port.
Parallel Port DMA
Channel
0, 1, 3
Allows you to choose DMA channel for the onboard parallel port in
ECP mode. Displays only when parallel port is enabled and in ECP
mode.
Keyboard/Mouse
Power On Function Disabled, Powerkey, Specific Key, Mouse Left, Mouse Right
This option, when enabled, allows system to be turned on by pressing
a specific key or moving the mouse.