3-20 Option Installation
Installing a DIMM
Install a memory module by performing the following steps:
1.
Remove the system unit cover (see “Removing the System Unit Cover”).
2.
If you need to remove a currently installed memory module, see “Removing a
DIMM.”
CAUTION:
Before you install a module, reduce
static discharge by touching the system's metal
chassis.
3.
Align the new module with an empty memory socket. Make sure the notches on
the module align with the keys in the socket.
4.
Press the module firmly into the socket (see Figure 3-17).
5.
Make sure the locking clips at either end of the module click closed.
Figure 3-17 Inserting a DIMM
Содержание PowerMate Enterprise
Страница 76: ...Section 2 Setup and Operation igure 2 2Figure 2 3 Figure 2 4 Figure 2 5 Figure 2 6 Figure 2 7 Figure 2 8 ...
Страница 196: ...Section 5 Repair Figure 5 1Figure 5 2Figure 5 3Figure 5 4Figure 5 5Figure 5 6Figure 5 7 ...
Страница 199: ...5 12 Repair 4 Slide the device out of the front of the system unit Figure 5 10 Removing a 5 1 4 Inch Device ...
Страница 271: ...Index 9 W Wake on LAN connector A 14 enabling 2 25 Z Zip drive 1 29 jumper settings B 7 specifications 1 51 ...
