NEC PowerMate eco, Инструкция по обслуживанию и справочник

Страница: 40 / 110

Setup and Configuration 2-19
Performing Partition Only Restore
If the system comes with a partitioned hard drive and the factory preinstalled software on
drive C: becomes unusable and you cannot boot from the hard drive, use the PowerMate eco
Product Recovery CD to restore the drive C: partition to its initial shipping configuration.
Use the Partition Only restore option only if the hard drive consists of
multiple partitions and if drive C: contains the operating system and related drivers. Move all
other data and applications from drive C: to other partitions (drives) or the Partition Only restore
process will erase them completely.
The Partition Only restore option deletes all files on drive C: and replaces them with the original
factory installed files. Only use the Partition Only restore option if the preinstalled software on
drive C: is unusable.
If you have any question about performing a Partition Only restore, NEC Solutions (America), Inc.
suggests that you contact Technical Support Services before starting the restore procedure. See
Chapter 8 for information about obtaining support from NEC Solutions (America), Inc.
Use the Product Recovery utility to perform a Partition Only restore as follows.
1. Disconnect all peripherals and power on the system.
Before using the Product Recovery CD, enter the BIOS Setup utility,
record the current settings, and restore the BIOS default settings. Save the default settings
before exiting the BIOS Setup utility.
2.
Load the PowerMate eco Product Recovery CD for the operating system into the CD-ROM
drive. Reboot the system.
3.
Read the License Agreement screen that appears. Click
Accept
to accept the agreement. If
you decline, the recovery utility exits.
4. At the Product Recovery utility screen, click Partition Only to restore drive C: of a multiple
partitioned drive to its original factory installed state.
5.
Read the Warning screen.
A warning is displayed, indicating that drive C: (the primary drive/partition) is about to be
erased and formatted. It may be necessary to reinstall software to the other drives
(partitions) to reestablish Start menu links and other configuration requirements stored on
drive C.
6. Click Continue to perform a Partition Only restore.
Do not turn off or disturb the system during the recovery process.
If you click Back , the recovery utility returns to the prior screen, which has an exit option.
If you click Continue , a screen with progress bars is displayed, letting you know the
progress of the recovery.
When the recovery process is complete, you are prompted to remove the CD from the
CD-ROM drive and reboot your system.