NEC PowerMate eco Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 110

background image

Copyright — August 2002

NEC Solutions (America), Inc.

15 Business Park Way

Sacramento, CA 95828

All Rights Reserved

Proprietary Notice and Liability Disclaimer

The information disclosed in this document, including all designs and related materials, is the valuable
property of NEC Solutions (America), Inc. (hereinafter “NECSAM”) and/or its licensors. NECSAM and/or its
licensors, as appropriate, reserve all patent, copyright and other proprietary rights to this document, including
all design, manufacturing, reproduction, use, and sales rights thereto, except to the extent said rights are
expressly granted to others.

The NECSAM product(s) discussed in this document are warranted in accordance with the terms of the
Warranty Statement accompanying each product. However, actual performance of each such product is
dependent upon factors such as system configuration, customer data, and operator control. Since
implementation by customers of each product may vary, the suitability of specific product configurations and
applications must be determined by the customer and is not warranted by NECSAM.

To allow for design and specification improvements, the information in this document is subject to change at
any time, without notice. Reproduction of this document or portions thereof without prior written approval of
NECSAM is prohibited.

As an E

NERGY

S

TAR

partner, NECSAM has determined that this product meets the E

NERGY

S

TAR

guidelines

for energy efficiency.

PowerMate eco is a trademark of NEC Solutions (America), Inc.; NEC is a registered trademark of NEC Corporation

and/or one of its subsidiaries. All are used under license. E

NERGY

S

TAR

is a U.S. registered trademark of the U.S.

government. Microsoft and Windows are registered trademarks of Microsoft Corporation. Transmeta and Crusoe are
trademarks of Transmeta Corporation. Intel is a registered trademark of Intel Corporation.

All other trademarks and registered trademarks are the property of their respective trademark owners.

«
1
2
3
4
...
»

Содержание PowerMate eco















































































































Отзывы:

Нет отзывов

Похожие инструкции для PowerMate eco

Бренд: Zotac Страницы: 28

Бренд: Aaeon Страницы: 43

Бренд: Vivo Страницы: 3

Бренд: MSI Страницы: 29

Бренд: Fujitsu Страницы: 38

Бренд: Fujitsu Страницы: 9

Бренд: Fujitsu Страницы: 10

Esprimo E5 Series

Бренд: Fujitsu Страницы: 73

DESKPOWER N300 Series

Бренд: Fujitsu Страницы: 61

Бренд: Fujitsu Страницы: 56

Бренд: Fujitsu Страницы: 50

ESPRIMO D5 Series

Бренд: Fujitsu Страницы: 83

ESPRIMO E420 E85+

Бренд: Fujitsu Страницы: 8

Бренд: Fujitsu Страницы: 54

Esprimo C series

Бренд: Fujitsu Страницы: 58

Esprimo P2 Series

Бренд: Fujitsu Страницы: 61

ESPRIMO P15 Series

Бренд: Fujitsu Страницы: 52

ESPRIMO E4 Series

Бренд: Fujitsu Страницы: 62

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды