NEC PowerMate eco, Инструкция по обслуживанию и справочник

Страница: 48 / 110

Disassembly and Reassembly 3-7
6. Remove the memory module as follows.
Press the locking tabs away from the sides of the module until the module pops up at an
angle.
Pull the memory module out of the slot along the angle and store it in a static-free bag.
Removing the Memory Module
A – Locking tab (1 of 2)
7. Install a memory module as follows.
Locate the alignment notch on the memory module (see the following figure).
Align the notch with the key in the slot connector.
Holding the memory module at a 45-degree angle, insert the module connector into the
socket. Firmly push the module into the socket.
Press down on the edge of the memory module until the locking tabs on the sides of the
socket snap into place, securing the module.
Installing the Memory Module
A – Locking Tab C – Memory Module
B – Module Alignment Notch