NEC PowerMate eco, Инструкция по обслуживанию и справочник

Страница: 49 / 110

3-8 Disassembly and Reassembly
8.
Inserting the tabbed end first, replace the memory slot cover. Secure it with the retaining
screw.
Replacing the Memory Slot Cover
A – Tabbed End of Memory Slot Cover B – Screw
9. Replace the rear cover (see “Rear Cover Removal” earlier in this section).
10.
Position the system on its base. Reconnect peripheral devices and the AC adapter.
Hard Drive Removal
Remove the hard drive as follows.
1.
Close all applications, shut down the operating system, turn off system power, and unplug
the AC power adapter and power cord from the power source and the back of the system.
2.
Turn off and disconnect all peripherals.
3.
Remove the rear cover (see “Rear Cover Removal” earlier in this chapter).
4. Disconnect the hard drive interface cable from the hard drive by carefully pulling the cable
loop (see the following figure).
5. Locate the pull-tab on the hard drive bracket (see the following figure). With the hard drive
interface cable out of the way, pull the hard drive out of the drive bay.
Note
You might need to press down on the rear LCD panel frame to clear the path for drive
removal.