NEC N8100-1575F, Руководство пользователя

Страница: 85 / 378

Configuring Your Server 4-9
Main
Option Parameter Description Your Setting
System Time HH:MM:SS Set the system time.
System Date MM/DD/YYYY Set the system date.
Hard Disk Pre-Delay [Disabled]
3 seconds
6 seconds
9 seconds
12 seconds
15 seconds
21 seconds
30 seconds When accessing the IDE device
for the first time during POST, the
system waits for the specified
time until the device becomes
ready.
SATA Port 0
SATA Port 1
SATA Port 2
SATA Port 3
SATA Port 4
SATA Port 5 Select submenu Shows the information on the
device connected to each
channel on the submenu. The
settings of some items may be
changed. However, leave the
items as they are at the
shipment.
Processor Settings Select submenu Shows the processor settings
submenu.
Language [English]
Français Select which language BIOS
displays.
[ ]: Factory-set
IMPORTANT:
Check and adjust the system clock before the
operation if any of the following conditions is applicable.
„
After carriage of device
„
After storage of device
„
After the device is entered into the pause state under the
environmental condition enduring device operation (temperature:
10°C - 35°C, humidity: 20% - 80%)
Check the system clock at the rough rate of once per month. When the
system clock is installed in a system requiring high time precision, it is
recommended to use a time server (NTP server).
If the system clock is remarkably delayed or advanced as the passage of
time in spite of adjustment, contact your service representative for
maintenance.