NEC N8100-1575F, Руководство пользователя

Страница: 300 / 378

10-32 Troubleshooting
The Telnet Service is not installed:
→
Adjust the computer name to 14 characters or less, and then install the Telnet
Service according to <How to install the Telnet Service>.
<How to install the Telnet Service>
1.
Click [Run] on Start menu.
2.
Type "tlntsvr /service" in the [Open] box, and click [OK].
3.
Click Start menu, point to [Control Panel] and click [Computer Management] and then
click the [Services] to specify whether the Telnet Service is registered.
* When the installation of Telnet Service is finished, there is no problem if the computer
name is set to 15 characters or more.
Power ON/OFF (Wake On LAN) feature does not work:
→
Immediately after the AC power is turned on, the Remote Power ON/OFF feature
(Wake ON LAN) is disabled. Start Windows 2003 once, provide settings as shown
below, then shutdown the system. After restart, the Remote Power On/Off feature
is available unless the AC power is turned off.
Select [Start]
→
[Administrative Tools]
→
[Computer Management].
Select Device Manager, double-click [Intel(R) PRO/1000EB Network Connection
with I/O Acceleration #n] under Network Adapter, and specify as follows in
[Detail] tab.
PME: [ON]
Wake On: [Magic Packet]
The system time lags:
→
If you do not use the server that adjust time such as NTP (Network Time Protocol)
Server, the system time may differ from actual time.
In this case, use NTP server or disable "Windows Time Service".