NEC N8100- 1241F, Руководство пользователя

Страница: 50 / 358

2-18 General Description
STANDARD FEATURES
High performance Expandability
„ Intel

Xeon

Processor
„ High-speed network interface
(1000Mbps/100Mbps/10Mbps supported)
„
High-speed disk access
(SATA2/Serial Attached SCSI)
„ High-speed memory access (DDR2-533
or DDR2-667)
„ One PCI EXPRESS (x8) bus
„ One PCI-X (64-bit/100 MHz) bus
„
Large memory of up to 48GB
„
Hot-swap hard disk drive bays
SATA 3.5”: up to 3 hard disk drives
SAS 3.5”: up to 3 hard disk drives
SAS 2.5”: up to 6 hard disk drives
„ Up to two multi-processors are available
for upgrade.
„ One backup file bay
„ USB2.0 interface (A USB-support driver
is required.)
High-reliability Many Available Features
„ Graphic accelerator "ATI RADEON 7000"
support
„
El Torito Bootable CD-ROM (no
emulation mode) format support
„ POWER switch mask
„ Software power-off
„ Remote power-on feature
„ AC-Link feature
„ Consoleless feature
Self-diagnosis
„ Remote Management Controller
„ Memory monitoring feature (error
correction/error detection)
„ CPU/memory degradation feature (logical
isolation of a failed device)
„ Memory chipkill feature
„ Memory mirroring/online spare memory
feature
„ Bus parity error detection
„ Temperature detection
„ Error notification
„ Internal fan monitoring feature
„ Internal voltage monitoring feature
„ Redundant power supply (hot-swap)
„
RoMB (RAID on mother board)
„
Auto-rebuild feature (hot-swappable)
„ BIOS password feature
„ Mechanical security lock
„ Redundant fans
„ Power On Self-Test (POST)
„ Test and Diagnosis (T&D)
Management Utilities Easy and Fine Setup
„ NEC ESMPRO
„ NEC DianaScope
Maintenance Features
„ Off-line Maintenance Utility
„ Memory dump feature using the DUMP
switch
„ NEC EXPRESSBUILDER (system setup
utility)
„ Configuration Parameter Diskette Creator
„ SETUP (BIOS configuration utility)
„ SoftwareRAID Setup Utility (Onboard
RAID configuration utility)