NEC N8100- 1241F, Руководство пользователя

Страница: 216 / 358

8-10 Troubleshooting
Error Messages on Virtual LCD
NEC EXPRESSSCOPE Engine (Remote Management Controller) on your server board allows you
to monitor the server status on the WEB browser-based screen of the client PC via network.
The virtual LCD (16 digits x 2 lines) in the "Host Information" area displays the POST codes and
status message.
When POST detects an error, the POST error code is displayed on the virtual LCD upon completion
of POST. See the table for POST error codes for details.
POWER ON
ATTENTION
Virtual LCD
Status indicators
Message send from BIOS
Message send from BMC
Example:
Messages displayed on upper line (BIOS message)
On-screen message Description Action
XX BIOS Rev YYYY POST in progress.
XX: POST code, YYYY: BIOS version This is not an error.
CPU Reconfigured POST completes with processor
degraded. Contact your service
representative.
Try the following steps to cancel
the error.
1. Start BIOS SETUP.
2. Select [Main] - Processor
Settings] - [Processor Retest] -
[Yes].
3. Select [Exit] - [Exit Saving
Changes].
Mem Reconfigured POST completes with memory
degraded. Contact your service
representative.
Try the following steps to cancel
the error.
1. Start BIOS SETUP.
2. Select [Advanced] - [Memory
Configuration] - [Memory
Retest] - [Yes].
3. Select [Exit] - [Exit Saving
Changes].