NEC N8100- 1241F, Руководство пользователя

Страница: 111 / 358

Configuring Your Server 4-11
Peripheral Configuration
IMPORTANT:
Note that the interrupt and/or base I/O address are not
overlapped with others. If the value set for the interrupt or base I/O
address is used in another resource, the yellow asterisk (*) appears.
Reset any item with the yellow asterisk properly.
Option Parameter Description Your Setting
Serial Port A Disabled
[Enabled] Selects whether serial port A is
enabled or disabled.
Base I/O address [3F8]
2F8
3E8
2E8 Selects the base I/O address for serial
port A.
Interrupt IRQ 3
[IRQ 4] Selects the interrupt for a serial port A.
Serial Port B Disabled
[Enabled] Selects whether serial port B is
enabled or disabled (display only).
Base I/O address 3F8
[2F8]
3E8
2E8 Selects the base I/O address for serial
port A.
Interrupt [IRQ 3]
IRQ 4 Selects the interrupt for a serial port A.
USB 2.0 Controller Disabled
[Enabled] Selects the USB 2.0 controller is
enabled or disabled.
Parallel ATA Disabled
[Enabled] Selects parallel ATA is enabled or
disabled.
Serial ATA* Disabled
[Enabled] Selects whether the serial ATA is
enabled or disabled.
SATA Controller
Mode Option* [Compatible]
Enhanced Compatible mode:
SATA and PATA drives are
automatically detected and
recognized as legacy mode.
Enhanced mode:
SATA and PATA drives are
automatically detected and
recognized as native mode.
SATA RAID* [Disabled]
Enabled Selects whether the RAID disk drives
that uses the onboard SATA is
enabled or disabled.
SATA AHCI [Disabled]
Enabled Select [Enabled] when SATA5 or
SATA6 is used (Advanced Host
Controller Interface).
[ ]: Factory-set
* Displayed only for the SATA hard disk drive model.