manualshive.com logo in svg

NEC mPD703128, Предварительное руководство пользователя

"NEC mPD703128" - это микросхема высокой производительности, для которой доступно предварительное Руководство пользователя. Скачайте его бесплатно на manualshive.com. Получите подробные инструкции по использованию этого продукта, чтобы максимально эффективно использовать все его возможности.

Поделиться
Скачать
background image

3

Preliminary User’s Manual U15839EE1V0UM00

•

The information in this document is current as of 18.08, 2003. The information is subject to change
without notice. For actual design-in, refer to the latest publications of NEC Electronics data sheets or
data books, etc., for the most up-to-date specifications of NEC Electronics products. Not all products
and/or types are available in every country. Please check with an NEC sales representative for
availability and additional information.

•

No part of this document may be copied or reproduced in any form or by any means without prior
written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that
may appear in this document.

•

NEC Electronics does not assume any liability for infringement of patents, copyrights or other
intellectual property rights of third parties by or arising from the use of NEC Electronics products
listed in this document or any other liability arising from the use of such NEC Electronics products.
No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual
property rights of NEC Electronics or others.

•

Descriptions of circuits, software and other related information in this document are provided for
illustrative purposes in semiconductor product operation and application examples. The incorporation
of these circuits, software and information in the design of customer's equipment shall be done
under the full responsibility of customer. NEC Electronics no responsibility for any losses incurred by
customers or third parties arising from the use of these circuits, software and information. 

•

While NEC Electronics endeavors to enhance the quality, reliability and safety of NEC Electronics
products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated
entirely. To minimize risks of damage to property or injury (including death) to persons arising from
defects in NEC Electronics products, customers must incorporate sufficient safety measures in their
design, such as redundancy, fire-containment and anti-failure features.

•

NEC Electronics products are classified into the following three quality grades: “Standard”, “Special”
and “Specific”.

The "Specific" quality grade applies only to NEC Electronics products developed based on a customer-
designated  “quality assurance program” for a specific application. The recommended applications of
NEC Electronics product depend on its quality grade, as indicated below. Customers must check the
quality grade of each NEC Electronics product before using it in a particular application.

"Standard": 

Computers, office equipment, communications equipment, test and measurement
equipment, audio and visual equipment, home electronic appliances, machine tools,
personal electronic equipment and industrial robots.

"Special": 

Transportation equipment (automobiles, trains, ships, etc.), traffic control systems,
anti-disaster systems, anti-crime systems, safety equipment and medical equipment 
(not specifically designed for life support).

"Specific": 

Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, 
life support systems and medical equipment for life support, etc.

The quality grade of NEC Electronics products is “Standard” unless otherwise expressly specified in
NEC Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in
applications not intended by NEC Electronics, they must contact NEC Electronics sales representative
in advance to determine NEC Electronics 's willingness to support a given application.

Notes:

1.

" NEC Electronics" as used in this statement means NEC Electronics Corporation and 
also includes its majority-owned subsidiaries.

2.

" NEC Electronics products" means any product developed or manufactured by or for
NEC Electronics (as defined above).

M8E 02.10

Содержание mPD703128





































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для mPD703128

IBM 3708 End-User Reference preview
3708
Бренд: IBM Страницы: 144
Parkside PDWE 8 A2 Operation And Safety Notes Translation Of The Original Instructions preview
PDWE 8 A2
Бренд: Parkside Страницы: 65
ZKTeco SRB Connection Manual preview
SRB
Бренд: ZKTeco Страницы: 2
IDTECK Star RFL200 Quick Manual preview
Star RFL200
Бренд: IDTECK Страницы: 12
Banner XS26-2 Series Manual preview
XS26-2 Series
Бренд: Banner Страницы: 2
Eaton CGLine+ Web Controller Installation And Operating Instructions Manual preview
CGLine+ Web Controller
Бренд: Eaton Страницы: 28
Technische Alternative UVR 63H Operation And Installation Manual preview
UVR 63H
Бренд: Technische Alternative Страницы: 68
Linear Technology LTC3703 Manual preview
LTC3703
Бренд: Linear Technology Страницы: 32
Freescale Semiconductor 56F8037 User Manual preview
56F8037
Бренд: Freescale Semiconductor Страницы: 41
rotork CQP Installation Commissioning Maintenance Manual preview
CQP
Бренд: rotork Страницы: 33
Tektronix TLA 711 Installation Manual preview
TLA 711
Бренд: Tektronix Страницы: 82
Licht-Technik Mix4-6 Functional Description preview
Mix4-6
Бренд: Licht-Technik Страницы: 13
HANYOUNG NUX TPR-3M Instruction Manual preview
TPR-3M
Бренд: HANYOUNG NUX Страницы: 2
Control Microsystems SCADAPack LP Hardware Manual preview
SCADAPack LP
Бренд: Control Microsystems Страницы: 47
Bibby Sterilin Techne TE-10A Operator'S Manual preview
Techne TE-10A
Бренд: Bibby Sterilin Страницы: 40
ARI-Armaturen ARI-PREMIO-Plus 2G Operating And Installation Instructions preview
ARI-PREMIO-Plus 2G
Бренд: ARI-Armaturen Страницы: 52
CTEK Z44009 Series User Manual preview
Z44009 Series
Бренд: CTEK Страницы: 24
Vitto Fingerprint Series User Manual preview
Fingerprint Series
Бренд: Vitto Страницы: 9

Бренды по названию

Популярные бренды

Загрузить еще бренды