NEC MH110, Руководство администратора

Страница: 34 / 62

4-10 Mobile Handset Configuration
MH110/MH120 IP Wireless Telephone Setup and Administration Guide - Revision 1
Set Admin P.W.
The Admin PW (password) controls access to the administration
functions in the Admin Menu. The password must be set in each Mobile
Handset for which controlled access is desired. Mobile Handsets are
shipped without any Admin Menu password.
User-defined Preferences
Table 4-7 lists navigation keys used to display and select options.
To configure the following options, the Mobile Handset must acquire the
system (no error message may display) and be at the extension display.
This is the standby state. While in the standby state, press and hold
FCN briefly to open the user options menu.
Table 4-7 Navigation keys
NOTE
If you exit with no entry, the password is erased and the display will not require it
before displaying the Admin Menu.
REFERENCE
User-defined preferences are also covered in the MH110/MH120 UNIVERGE WL
Mobile Handsets User Guide. The system administrator can refer to this list for more
information about customizing Mobile Handset settings.
Key Names Descriptions
Up/Down buttons Displays previous/next menu item.
Select button Selects the menu item or option.
OK softkey Selects the menu item or option.
Save softkey Saves the entry.
Bksp softkey Backspaces to allow editing of entry.
Cncl softkey Cancels edit and returns to previous menu level.
Up softkey Returns to previous menu level.
Exit softkey Exits the menu (at the top level).
End Call key Exits to standby state (from any level).