NEC MH110, Руководство администратора

Страница: 51 / 62

Certifying MH110/MH120 Mobile Handsets 9-3
MH110/MH120 IP Wireless Telephone Setup and Administration Guide - Revision 1
Example:
A displayed value of 40 indicates -40dBm, and is therefore a
stronger signal than a display of 50 (which indicates
-50dBm). At least one access point’s reading should be
stronger than -70 dBm in all areas.
Detect Overlap or Conflicts
Press FCN to toggle to the Site Survey function that shows the channel
number of the access points. Use this information to detect overlaps or
conflicts in access point signaling.
Figure 9-2 Detect Overlap or Conflicts
•
XXX1 through XXX4 are the last four digits of the access points’ MAC
address.
• ZZ is the channel number that the access point is using.
It is preferable that no overlaps exist anywhere in your facility. If the
site survey mode indicates two APs using the same channel, then at
least one other AP must be indicated at 10 dBm stronger than those APs
to avoid channel conflicts.
NOTE
Note any areas that have inadequate dBm readings.
NOTE
Note any areas that have access points that are in contention for the same channel.