NEC MH110, Руководство администратора

Страница: 28 / 62

4-4 Mobile Handset Configuration
MH110/MH120 IP Wireless Telephone Setup and Administration Guide - Revision 1
IP Address
Table 4-4 describes two modes in which Wireless Telephones can
operate:
• DHCP enabled
• Static IP
Select the mode for operation from the IP Address menu.
Table 4-4 Wireless Telephone Modes
Table 4-5 describes components that must be configured, regardless of
the mode in which the Wireless Telephone is operating.
Security *None
WEP Authentication Open System
Shared Key
WEP On/Off
Key Information Default Key
Key Length
Key 1-4
Rotation Secret
Cisco FSR Username
Password
Extension number
OAI on/off Enable OAI
Disable OAI
Admin PW
Admin Menu Items 2nd Level 3rd Level 4th Level
Modes Descriptions
Use DHCP Will use Dynamic Host Configuration Protocol to assign an IP
address each time the Mobile Handset is turned on. If DHCP is
enabled, the Mobile Handset also receives all other IP address
configurations from the DHCP server. *
Static IP Allows you to manually set a fixed IP address. If selected, the Mobile
Handset will prompt for the IP addresses of each configurable
network component. When entering addresses, enter the digits only,
including leading zeroes. No periods are required.