NEC MH110, Руководство администратора

Страница: 47 / 62

8-1
MH110/MH120 IP Wireless Telephone Setup and Administration Guide - Revision 1
8
Testing a Mobile Handset
This chapter describes tests that can be performed in an active wireless
area to verify proper registration and operation of each Mobile Handset.
Use the following steps to test a Mobile Handset.
Step 1
Power on the Mobile Handset by pressing Power On . You will see a
series of messages displayed as the Mobile Handset acquires the
system. The Mobile Handset should display the user extension or the
login screen.
Step 2
Login using the proper login id and password . Any error messages
should clear.
Step 3
Press the Start Call key. The extension number should be replaced by
information from the supported NEC VoIP solution and you should hear
dial tone.
Step 4
Place a call and listen to the audio quality. End the call by pressing the
End Call key.
Step 5
Place a call to the Mobile Handset and verify ring , answer , clear
transmit , and clear receive audio.
Step 6
Go off-hook and use the FCN key to verify the Features list.
Step 7
Go off-hook and use the LINE key to verify the Line appearances/Line
features list.
Step 8
Press the End Call key. Any line indicators should turn off and the
extension number display should return.