![background image](http://html.mh-extra.com/html/nec/express5800-r140a-4/express5800-r140a-4_user-manual_251300075.webp)
Setting Up Your Server 3-3
SELECTING A SITE
Your server unit should be mounted in a standard EIA 19-inch rack cabinet.
Refer to the documentation attached to the rack or contact your service representative for
installation of the rack.
WARNING
Observe the following instructions to use the server safely. Failure to follow
these instructions may result in death or serious personal injury. See pages 1-3
to 1-8 for details.
■
Do not use the server in any unapproved place.
CAUTION
Observe the following instructions to use the server safely. Failure to follow
these instructions may cause a fire, personal injury, or property damage. See
pages 1-3 to 1-8 for details.
■
Do not carry or install the server only by a single person.
■
Do not install the server where the load may be concentrated on a specific
point.
■
Do not install any component on the server only by a single person.
■
Do not pull out a device from the rack if the rack is unstable.
■
Do not provide the wiring exceeding the rating power.
IMPORTANT:
Increase in temperature within rack and air flow
If more than one server are installed on the rack or the ventilation
within the rack is not enough, the temperature in the rack may be raised
by the heat generated from the units to be higher than the operation
temperature of the server (10 to 35°C).
It causes the server to operate improperly. Review the air flow within
the rack or in the room and take sufficient measures so that the
temperature within the rack does not exceed the warranted temperature
range during the system operation.
Содержание Express5800/R140a-4
