Upgrading Your Server 9-11
Power Supply Unit
If your server is operated with 200 to 240 VAC power by using an optional AC cable or with 100
VAC in specific power configuration, the server can continue its operation without interruption even
if a single power supply unit fails (power redundant configuration).
In addition, if the AC power of each power supply unit is divided into two lines, the server can
continue its operation without power interruption even if either of AC power line fails (AC power
redundant configuration).
Maximum configuration that supports redundant feature at 100 VAC
*1, *2
:
N8100-1478F NEC Express5800/R140a-4 (Intel® Xeon® Processor E7310 Model)
N8101-376
CPU Kit (XMPQ/1.60G (2x2)), 3 sets
N8102-298
Additional 4GB Memory Module set, 3 sets
N8100-1479F NEC Express5800/R140a-4 (Intel® Xeon® Processor E7420 Model)
N8101-423
CPU Kit (XMPQ/2.13G (8)), 3 sets
N8102-298
Additional 4GB Memory Module set, 3 sets
*1 No restriction is imposed except for processor and DIMM
*2 N8100-1480F does not support this feature.
If the power cord is disconnected from the power supply unit immediately after it is connected, the
event "power degraded" may not be registered in OS event log, and only the event "power
recovered" is registered.
IMPORTANT:
The AC power cord provided with the server accepts
100 VAC only. Do not use the cord with 200-VAC power. To use the
server with 200 VAC, connect an optional AC cable that can accept 200
VAC.
How to enable the redundant power feature
The server is shipped with 100-VAC non-redundant power configuration. To use the server with
100-VAC or with 200-VAC redundant power configuration, you need to update PIA (Platform
Information Area) / SDR (Sensor Data Record).
You can obtain the latest PIA/SDR from the following site:
http://www.nec.co.jp/express/index.html
Select [Servers], then [Support] to download the necessary information. For update procedure, read
the file "README.TXT" provided with the program.
Содержание Express5800/R140a-4
