![background image](http://html.mh-extra.com/html/nec/express5800-140he/express5800-140he_service-manual_251225007.webp)
-
iii
-
Safety Notes
This section provides notes on using the server safely. Read this section carefully to ensure proper
and safe use of the server. For symbols, see "SAFETY INDICATIONS" provided earlier.
General
WARNING
Do not use the server for services where critical high availability may directly affect
human lives.
The server is not intended to be used with or control facilities or devices concerning
human lives, including medical devices, nuclear facilities and devices, aeronautics
and space devices, transportation facilities and devices; and facilities and devices
requiring high reliability. The manufacturer assumes no liability for any accident
resulting in personal injury, death, or property damage if the server has been used in
the above conditions.
Do not use the server in any unapproved place.
Install the server on a standard EIA 19-inch rack cabinet.
Do not install the rack containing the server in a place inappropriate to the rack
installation environment.
Failure to follow these instructions may cause some bad influences to be imposed
on the server and other systems installed on the rack and also a fire or personal
injury due to falling of the rack may occur.
For the detailed explanation on the place where the server should be installed and
the earthquake-resistant construction for the rack, refer to the manual attached to
the rack.
Always install the server on a rack conforming to the relevant standard.
Install the server on a rack conforming to the EIA standard for the server to be used.
Do not use the server with installed on any other rack than standard EIA 19-inch
rack or without the installation on a proper rack. Failure to follow these instructions
may cause the server to operate incorrectly and/or personal injury or damages of
surrounding devices to occur.
Do not use the server if any smoke, odor, or noise is present.
If smoke, odor, or noise is present, immediately turn off the POWER switch and
disconnect the power plug from the outlet. Using the server in such conditions may
cause a fire.
Keep needles or metal objects away from the server.
Do not insert needles or metal objects into ventilation holes in the server or
openings in the floppy disk or CD-ROM drive. Doing so may cause an electric
shock.
Keep water or foreign matter away from the server.
Do not let any form of liquid (water etc.) or foreign matter (e.g., pins or paper clips)
enter the server. Failure to follow this warning may cause an electric shock, a fire, or
a failure of the server. When such things accidentally enter the server, immediately
turn off the power and disconnect the power plug from the outlet.
Содержание EXPRESS5800/140He
