NEC EXPRESS5800/140He, Руководство по обслуживанию

Страница: 147 / 184

- 131 -
On-screen message Action
0B00 Rebooted during BIOS boot at post
Code Replace the I/O board.
0B1B PCI System Error on
Bus/Device/Function
0B1C PCI Parity Error on
BUS/Device/Function
Replace the I/O board.
Replace the PCI board.
0B22 Processors are installed out of order.
0B28 Unsupported CPU detect on CPU
Slot1
0B29 Unsupported CPU detect on CPU
Slot2
0B2A Unsupported CPU detect on CPU
Slot3
0B2B Unsupported CPU detect on CPU
Slot4
Replace the processor.
0B30 Fan 1 Alarm occurred.
0B31 Fan 2 Alarm occurred.
0B32 Fan 3 Alarm occurred.
0B33 Fan 4 Alarm occurred.
0B34 Fan 5 Alarm occurred.
0B35 Fan 6 Alarm occurred.
0B36 Fan 7 Alarm occurred.
0B37 Fan 8 Alarm occurred.
Clean the fan.
Replace the fan.
0B50 Processor#1 with error taken off line.
0B51 Processor#2 with error taken off line.
0B52 Processor#3 with error taken off line.
0B53 Processor#4 with error taken off line.
0B5F Forced to use CPU with error.
Replace the processor.
Replace the processor board.
After replacement, start SETUP and
execute [Clear CPU Error].
Update the system with the latest BIOS.
0B60 DIMM group #1 has been disabled
0B61 DIMM group #2 has been disabled
0B62 DIMM group #3 has been disabled
0B63 DIMM group #4has been disabled
0B64 DIMM group #5 has been disabled
0B65 DIMM group #6 has been disabled
0B66 DIMM group #7 has been disabled
0B67 DIMM group #8 has been
disabled
Insert the DIMM again.
Check if ECC 1-bit/multi-bit error is
recorded in the system event log. If the
error is recorded, replace the relevant
DIMMs in pair.
If the failed DIMMs cannot be identified,
replace all the DIMMs in the relevant group.
Replace the memory board.
After the replacement, start SETUP and
execute [Clear DIMM Error].
0B70 The error occurred during temperature
sensor reading Replace the front panel.
Replace the CPU.
Replace the Processor board.
Replace the I/O board.
0B71 System Temperature out of the range Set the room temperature in the range
between 10 to 35ºC.
Check the system event log to identify the
thermal sensor which has detected the
out-of-range temperature.