NEC DT830 Series, Руководство пользователя

Страница: 106 / 154

INTERNAL ZONE PAGING
WITH MEET-ME PAGE
This feature allows terminal users to page over the
built-in speakers of the terminals within the
assigned zone or all zones.
The feature access code/feature key is set by
system data setting at initial installation. For
details, please contact the system
administrator.
TO PAGE (TERMINAL A)
The terminal A pages the terminal B.
1. Press Speaker key.
You will receive a dial tone.
Speaker key lamp lights red. →
2. Dial Internal Paging access code for
desired zone or all zones or press
Internal Paging feature key assigned
for desired zone or all zones.
PAGING
11:00 AM SUN 1 JUN 2014
Recall PICK >>>>
3. Page the terminal B.
TO ANSWER (TERMINAL B)
1. Dial Meet-Me Answer access code.
They are immediately connected.
200
11:00 AM SUN 1 JUN 2014
MIC Mute
BOSS/SECRETARY
CALLING
A secretary with a terminal can use an appearance
of the boss' extension to screen calls for that
extension, and announce and/or transfer calls to
that extension. Additionally, the secretary can call
the boss during a busy condition and can send a
message waiting indication to the boss' terminal.
The feature access code/feature key is set by
system data setting at initial installation. For
details, please contact the system
administrator.
TO CALL BOSS FROM
SECRETARY
1. Lift the handset.
You will receive a dial tone.
Speaker key lamp lights red. →
2. Press boss’ ringing line and ask
calling party to hold.
201
11:00 AM SUN 1 JUN 2014
MIC Mute
3. Press boss’ line again.
Voice Call is automatically established to
boss’ extension.
4. Announce the call to the boss.
IF BOSS ACCEPTS CALL
1. Secretary replaces the handset.
Boss and secretary extension each display
the other’s number.
ICM 201
11:00 AM SUN 1 JUN 2014
MIC Mute
2. Boss lifts the handset or presses
flashing line to answer the call.
FEATURE OPERATION
99