Nebu-tec SaHoMa, Инструкция по эксплуатации

Страница: 39 / 64

Cleaning and storing the SaHoMa-II inhalation set for horses |
4
Version: NTI_HM-200_IFU-EN_G
Page
34
Storing the SaHoMa
®
-II inhalation set for horses
After cleaning, the SaHoMa
®
-II inhalation set for horses has to be properly stowed in
the corresponding SaHoMa
®
-II carrying box.
Especially during the first inhalation processes and to establish a routine, it makes
sense to exactly follow the individual steps described in these instructions for use. In
this case, stow the SaHoMa
®
-II inhalation set for horses after cleaning, disassembled
into its individual parts in the SaHoMa
®
-II carrying box.
As soon as you are familiar with the use of the SaHoMa
®
-II Inhalation set for horses
and also the horse has got used to the inhalation, you do not have to disassemble the
SaHoMa
®
-II inhalation set completely any more, but can stow it already assembled for
the next inhalation. Therefore, proceed as follows:
After cleaning all components, first insert a SaHoMa
®
-II filter membrane into the
SaHoMa
®
-II filter basket and attach it to the SaHoMa
®
-II housing. You can also place
the cleaned SaHoMa
®
-II sealing ring in the designated place of the SaHoMa
®
-II
housing. Additionally, attach the SaHoMa
®
-II fastening strap to the SaHoMa
®
-II
housing and stow it in there. Finally, you can slide the SaHoMa
®
-II protection cover
on without having it completely snap into place. When starting the next inhalation
process, you only have to slide on the SaHoMa
®
-II control unit and attach a filled
SaHoMa
®
-II mesh nebulization unit.
⚠
ATTENTION!
Always disconnect the SaHoMa
®
-II control unit and the SaHoMa
®
-II mesh
nebulization unit from the SaHoMa
®
-II inhalation mask after each inhalation
process.
We strongly recommend to protect the SaHoMa
®
-II control unit from any ingress
of moisture by storing it separately from the remaining components, e.g. in a
liquid-repellent Zipper
®
bag, and stowing it with it in the SaHoMa
®
-II carrying box.
For protection, we also recommend to store only completely dry components in
the SaHoMa
®
-II carrying box in order to avoid (moisture) damage to the individual
components.