Nebu-tec SaHoMa, Инструкция по эксплуатации

Страница: 28 / 64

3 |
Performing the inhalation process
Page
23
Version: NTI_HM-200_IFU-EN_G
When the set time has elapsed, the aerosol production stops. The SaHoMa
®
-II control
unit indicates the end of the inhalation process by two light bars running
synchronously from the center to the right and left.
After some time the SaHoMa
®
-II control unit switches off automatically. The
SaHoMa
®
-II control unit can also be switched off manually by shortly pressing the
button.
⚠
ATTENTION!
In program 2, there is no automatic switch-off when the inhalation solution is
completely used up! Therefore, please make sure that you have filled in an
adequate amount of inhalation solution for the selected period of time or stop the
inhalation process manually after the inhalation solution has been completely
nebulized.
Running empty can cause damage to the SaHoMa
®
-II mesh
nebulization unit.
☝
Advice
The SaHoMa
®
-II control unit resets after switching off. The desired time must
therefore be set again for the next inhalation process.