Nebu-tec SaHoMa, Инструкция по эксплуатации

Страница: 29 / 64

Performing the inhalation process |
3
Version: NTI_HM-200_IFU-EN_G
Page
24
Ending the inhalation process
The inhalation process can be ended either by the integrated, automatic switch-off
function or by manually switching off the SaHoMa
®
-II control unit.
Automatic switch-off function in program 1
If the inhalation solution has been completely nebulized in program 1, the aerosol
production stops (= automatic switch-off). The SaHoMa
®
-II control unit indicates the
end of the inhalation process by two light bars running synchronously from the center
to the right and left. After some time the SaHoMa
®
-II control unit switches off
automatically.
Manual ending of inhalation
You can also stop the inhalation process in Program 1 and Program 2 by manually
switching off the SaHoMa
®
-II control unit. To do this, shortly press the button until the
multifunction light of the SaHoMa
®
-II control unit goes out.
⚠
Caution!
To activate the automatic switch-off, the SaHoMa
®
-II control unit needs to run for
at least two minutes .
⚠
ATTENTION!
In program 2, there is no automatic switch-off when the inhalation solution is
completely used up!