Intended Use
6
GERMAN
10. Replace the contact fluid after 24 hours at the latest.
11. Do not use cleaning solutions, vinegar, hot or even boiling water, etc. to clean
the housing, contact fluid chamber, quartz or sensors.
12.
Do not use alkaline aqueous-based cleaning solutions, aromatic
hydrocarbons, ammonia or amines to clean the autoclavable plastic parts.
Instead, use cleaners based on aliphatically saturated hydrocarbons, alcohol,
diluted mineral acids, neutral or acidic saline solutions.
NOTE
The device may heat up on the underside in the case of extended use.
3.0 Intended
use
Your
OPTINEB
®
-ir
ultrasonic nebulizer is a portable device that is intended to
produce aerosols in various particle sizes by using different baffle plates (see
Section 3.2). This ensures an optimal and identifiable deposition of your
medication.
3.1 Function during ventilation
The
OPTINEB
®
-ir
ultrasonic nebulizer can be used with all ventilators.
It is only permissible to install the
OPTINEB
®
-ir
ultrasonic nebulizer into your
ventilation system as specified in the operating instructions.
If the
OPTINEB
®
-ir
ultrasonic nebulizer is in operation, aerosol production takes
place.
The fog generated is transported by the inspiratory flow to the patient, or is
introduced via a T-piece by means of the control through the line for medication
nebulization only during the inspiration phase directly at the tube body. (see
sections 5.09/5.10/5.11)
WATSON LABORATORIES, INC. , IPR2017-01621, Ex. 1006, p. 6 of 33
