Programmes
20
GERMAN
8.2.6 Features of the sixth program (P6)
The program was designed for ventilation purposes. The active output intervals
and the pause times are adjustable using the keypad. (See Point 8.3 Individual
programming of Program 6 with the
OPTINEB
®
-ir
)
8.3 Individual
programming
of
Program 6 with the OPTINEB
®
-ir
In order to program Program 6 in an individually customized way, please proceed
as follows:
Select Program 6 as described in Point 8.1.
If you have selected Program 6, hold down both the (
“Start/Stop”
and the
“On/Off”
) key simultaneously for approx. 2 seconds until the display flashes.
The number now flashing indicates the operation duration in seconds for the
active phase (nebulization phase). Set the desired time by navigating with the
(
“Start/Stop”
and
“On/Off”
) keys. Once the desired time has been set, let the
OPTINEB
®
-ir
stand for approx. 5 seconds without pressing any keys. Then the
set time will be automatically saved. Now the active phase is set.
In order to now set the passive phase, please perform the same steps.
Hold down both the (
“Start/Stop”
and the
“On/Off”
) key simultaneously for
approx. 2 seconds until the display flashes. Now you will see the previously set
time of the active phase. Navigate with the
“On/Off”
key upwards until the
number 15 appears. Press the
“On/Off”
key again and it shows “PA” in the
display. Now you are in the parameter settings of the Pause phase. By further
navigating with the
“On/Off”
key, you can also set the time of the Pause phase
in seconds. Once the desired time has been set, let the
OPTINEB
®
-ir
stand for
approx. 5 seconds without pressing any keys. Then the set time will be
automatically saved.
Now the passive phase is set.
By pressing the
“Start/Stop”
key, the
OPTINEB
®
-ir
now starts to nebulize in the
active/passive phase.
IMPORTANT
Please note the following details for custom programming of the sixth program:
WATSON LABORATORIES, INC. , IPR2017-01621, Ex. 1006, p. 20 of 33
