manualshive.com logo in svg

National Instruments VME-MXI-2, Руководство пользователя

Пользовательский мануал для National Instruments VME-MXI-2 доступен для бесплатного скачивания с нашего веб-сайта. Этот руководство по эксплуатации поможет вам оптимально использовать продукт и повысить его эффективность. Посетите manualshive.com для загрузки.

Поделиться
Скачать
background image

Important Information

Warranty

The VME-MXI-2 is warranted against defects in materials and workmanship for a period of one year from the
date of shipment, as evidenced by receipts or other documentation.  National Instruments will, at its option,
repair or replace equipment that proves to be defective during the warranty period.  This warranty includes
parts and labor.

The media on which you receive National Instruments software are warranted not to fail to execute
programming instructions, due to defects in materials and workmanship, for a period of 90 days from date of
shipment, as evidenced by receipts or other documentation.  National Instruments will, at its option, repair
or replace software media that do not execute programming instructions if National Instruments receives
notice of such defects during the warranty period.  National Instruments does not warrant that the operation
of the software shall be uninterrupted or error free.

A Return Material Authorization (RMA) number must be obtained from the factory and clearly marked on
the outside of the package before any equipment will be accepted for warranty work.  National Instruments
will pay the shipping costs of returning to the owner parts which are covered by warranty.

National Instruments believes that the information in this manual is accurate.  The document has been
carefully reviewed for technical accuracy.  In the event that technical or typographical errors exist, National
Instruments reserves the right to make changes to subsequent editions of this document without prior
notice to holders of this edition.  The reader should consult National Instruments if errors are suspected.  In
no event shall National Instruments be liable for any damages arising out of or related to this document or
the information contained in it.

EXCEPT AS SPECIFIED HEREIN, NATIONAL INSTRUMENTS MAKES NO WARRANTIES, EXPRESS
OR IMPLIED, AND SPECIFICALLY DISCLAIMS ANY WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE.  CUSTOMER’S RIGHT TO RECOVER DAMAGES CAUSED
BY FAULT OR NEGLIGENCE ON THE PART OF NATIONAL INSTRUMENTS SHALL BE LIMITED TO
THE AMOUNT THERETOFORE PAID BY THE CUSTOMER.  NATIONAL INSTRUMENTS WILL NOT BE
LIABLE FOR DAMAGES RESULTING FROM LOSS OF DATA, PROFITS, USE OF PRODUCTS, OR
INCIDENTAL OR CONSEQUENTIAL DAMAGES, EVEN IF ADVISED OF THE POSSIBILITY THEREOF.
This limitation of the liability of National Instruments will apply regardless of the form of action, whether in
contract or tort, including negligence.  Any action against National Instruments must be brought within one
year after the cause of action accrues.  National Instruments shall not be liable for any delay in performance
due to causes beyond its reasonable control.  The warranty provided herein does not cover damages,
defects, malfunctions, or service failures caused by owner’s failure to follow the National Instruments
installation, operation, or maintenance instructions; owner’s modification of the product; owner’s abuse,
misuse, or negligent acts; and power failure or surges, fire, flood, accident, actions of third parties, or other
events outside reasonable control.

Copyright

Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or
mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in
whole or in part, without the prior written consent of National Instruments Corporation.

Trademarks

NI-VXI™ is a trademark of National Instruments Corporation.

Product and company names listed are trademarks or trade names of their respective companies.

WARNING REGARDING MEDICAL AND CLINICAL USE OF NATIONAL INSTRUMENTS PRODUCTS

National Instruments products are not designed with components and testing intended to ensure a level of
reliability suitable for use in treatment and diagnosis of humans.  Applications of National Instruments
products involving medical or clinical treatment can create a potential for accidental injury caused by product
failure, or by errors on the part of the user or application designer.  Any use or application of National
Instruments products for or involving medical or clinical treatment must be performed by properly trained
and qualified medical personnel, and all traditional medical safeguards, equipment, and procedures that are
appropriate in the particular situation to prevent serious injury or death should always continue to be used
when National Instruments products are being used.  National Instruments products are NOT intended to be
a substitute for any form of established process, procedure, or equipment used to monitor or safeguard
human health and safety in medical or clinical treatment.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Содержание VME-MXI-2







































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для VME-MXI-2

Cypress Suprex SPX-7400 Series Operation Manual preview
Suprex SPX-7400 Series
Бренд: Cypress Страницы: 18
Directed XPRESSKIT GM9 Manual preview
XPRESSKIT GM9
Бренд: Directed Страницы: 16
Emeril Lagasse Blender & Beyond Plus HB2248 Owner'S Manual preview
Blender & Beyond Plus HB2248
Бренд: Emeril Lagasse Страницы: 20
X-Tra Power XPA12/24-2 Translation Of The Original Operating Instructions preview
XPA12/24-2
Бренд: X-Tra Power Страницы: 34
OBH Nordica Blend Force LH4358S0 Instructions Of Use preview
Blend Force LH4358S0
Бренд: OBH Nordica Страницы: 52
Xantia 81135 Instructions Manual preview
81135
Бренд: Xantia Страницы: 30
IOGear GCE700 User Manual preview
GCE700
Бренд: IOGear Страницы: 24
Fly-Link FL-WA930RE User Manual preview
FL-WA930RE
Бренд: Fly-Link Страницы: 46
Planet WBT-1000 Quick Installation Manual preview
WBT-1000
Бренд: Planet Страницы: 10
weBoost Drive Reach Fleet Installation Manual preview
Drive Reach Fleet
Бренд: weBoost Страницы: 16
Tru RC-100PB Instruction Manual preview
RC-100PB
Бренд: Tru Страницы: 12
Altech Pro A/V User Manual preview
Pro A/V
Бренд: Altech Страницы: 31
Blendtec Q-SERIES Manual preview
Q-SERIES
Бренд: Blendtec Страницы: 16
Ecler VEO-XRI1C User Manual preview
VEO-XRI1C
Бренд: Ecler Страницы: 23
Create FULLMIX RETRO User Manual preview
FULLMIX RETRO
Бренд: Create Страницы: 40
RedOne RO – BB Owner'S Manual preview
RO – BB
Бренд: RedOne Страницы: 5
Hamilton Beach 51103 Use & Care Manual preview
51103
Бренд: Hamilton Beach Страницы: 20
Hamilton Beach 51110 Use & Care Manual preview
51110
Бренд: Hamilton Beach Страницы: 24

Бренды по названию

Популярные бренды

Загрузить еще бренды