NAPCO LIBRA LIB-P432EX, Инструкция по программированию

Страница: 32 / 68

LIBRA LIB-P432EX Series Programming Instructions NAPCO Security Systems
Page 32
CS SYSTEM REPORTING CODES:
1. Enter in corresponding address location
(left and right digits).
NOTE: Left digit is the first digit and
right digit is the second digit in a two
digit CS receiver format.
2. Valid entries are: 1-9, 0 and B-F.
NOTE: A is not permitted.
3. To disable a code leave boxes blank
(•).
NOTE: Dark shaded data value box
shows option not available.
4. Press
u
to save.
[Default = blank (•) blank (•) from address 0670-0682]
[Default = blank (•) blank (•) from address 0683-0705]
CS SYSTEM
REPORTING CODES
ADDR
Alarm Restore blank (•) 0670
Trouble
blank (•) 0671
Trouble Restore
blank (•) 0672
Xmitter Low Battery
blank (•) 0673
Xmitter Supervision
blank (•) 0674
Xmitter Tamper
blank (•) 0675
RESERVED
blank (•) 0676 blank (•)
Opening
blank (•) 0677
Closing
blank (•) 0678
Opening after Alarm
blank (•) 0679
Conditional Close
blank (•) 0680
Cancel
blank (•) 0681
Test Timer
0682
ADDRESS 0670-0682
CS SYSTEM
REPORTING CODES
ADDRESS 0683-0708
ADDR
Telco Fail 0683
RF Rec. Trouble
0684
Memory Fail
0685
Low Battery
0686
Panel AC Fail
0687
RESERVED
blank (•) 0688 blank (•)
Alarm Output Superv.
0689 bl
Ambush
0698
Panic
0699
Fire
0700
Auxiliary
0701
Tamper
0702
Fail to Open
0703
Fail to Close
0704
Keyfob Low Battery
0705
CS SYSTEM REPORTING OPTIONS (ADDRESS 0670-0705)
CS AREA & SYSTEM REPORTING OPTIONS (ADDRESS 0785, 0786 & 0788)
[Default = blank (•) blank (•)]
LEFT DIGIT (SUM RIGHT DIGIT (SUM
ADDRESS 0788
CS AREA & SYSTEM REPORTING OPTIONS:
1. Select the desired option by circling the data values for each digit (left and right).
2. Add the data values (ex: F=15=(1+2+4+8) from the selected options. See page 23).
3. Enter in address location (left and right digits).
NOTE: Dark shaded data value box shows option not available. Press
u
to save.
CS SYSTEM REPORT OPTIONS
LEFT DATA
VALUES
(CIRCLE
)
Cancel Next Test Timer on any Report 1
Disable Wait for Silence (Pager Format) 2
Disable Wait for Handshake on Transmit 4
Disable Auto Dial Tone Detect 8
RIGHT DATA
VALUES
(CIRCLE
)
CS SYSTEM REPORT OPTIONS
1 Backup Report on Telco 1 & 2
2 Touch-tone Dialing Only *
4 Touch-tone Dialing w/Rotary Backup *
8 RESERVED
* NOTE: If neither Touch-tone Dialing
nor Touch-tone w/Rotary Backup is
selected, then system defaults
automatically to Rotary Dialing. Leave
blank (•) to select Rotary Dialing.
[Default = blank (•) blank (•)]
DISABLE OPENING REPORTS
LEFT DIGIT RIGHT DIGIT (SUM
OF DATA VALUES)
blank (•)
ADDRESS 0785
RIGHT DATA
VALUES
(CIRCLE
)
AREA
1
AREA 1
2
AREA 2
4
AREA 3
8
AREA 4
[Default = blank (•) blank (•)]
DISABLE CLOSING REPORTS
LEFT DIGIT RIGHT DIGIT (SUM
OF DATA VALUES)
blank (•)
ADDRESS 0786
RIGHT DATA
VALUES
(CIRCLE
)
AREA
1
AREA 1
2
AREA 2
4
AREA 3
8
AREA 4