NAPCO LIBRA LIB-P432EX, Инструкция по программированию

Страница: 1 / 68

HARDWIRE WIRELESS
L I B R A - P 4 3 2 E X S e r i e s
CONTROL PANEL/COMMUNICATOR
Programming the LIBRA LIB-P432EX, LIB-P432EXT, LIB-P432EXT-230 control panels with the
GEM-DXRP2 , GEM-DXRP3 , GEM-DXK2 , GEM-DXK3 and GEM-DXK4RF Series Keypads
WI1771 9/08
© NAPCO 2008
Quick Start (for GEM-DXK2):
1. Refer to the wiring diagram, connect Siren, Aux. Power, PGM Out-
put, Remote Bus, Earth Ground, Zone and Telephone Wiring. NOTE:
See Installation Instructions (WI1691).
2. Connect AC power first and then the battery.
3. Configure the keypad (see page 55).
4. Access the Easy Menu Driven (Dealer Program) Mode:
Press
456789 w
Press NO (" X " or
q
) until "
TURNON PROG Y/N
" appears on the keypad.
Press YES ("
r
" or
p
) to enter Dealer Program Mode. See page 5.
Quick Start (for GEM-DXK3):
1. Refer to the wiring diagram, connect Siren, Aux. Power, PGM Out-
put, Remote Bus, Earth Ground, Zone and Telephone Wiring. NOTE:
See Installation Instructions (WI1691).
2. Connect AC power first and then the battery.
3. Configure the keypad (see page 55).
4. Access the Easy Menu Driven (Dealer Program) Mode:
Press
456789 w
Press NO (" X " or
q
) until "17" appears on the keypad.
Press YES ("
r
" or
p
) to enter Dealer Program Mode. See page 5.
PROGRAMMING
INSTRUCTIONS
R
Publicly traded on NASDAQ Symbol: NSSC
GEM-DXK2
Dealer Code
Dealer Code
GEM-DXK3
32
DXK4RF-319 Keypad
DXK4RF-433 Keypad
™