NAPCO GEM-DXK1, Инструкция по программированию

Страница: 1 / 60

HARDWIRE WIRELESS
L I B R A - P 4 3 2 E X S e r i e s
CONTROL PANEL/COMMUNICATOR
Programming the LIBRA LIB-P432EX , LIB-P432EXT , LIB-P432EXT-230
Control Panels with the GEM-DXRP1 and the GEM-DXK1 Keypads
WI1690 9/08 © NAPCO 2008
PROGRAMMING
INSTRUCTIONS
R
Publicly traded on NASDAQ Symbol: NSSC
Quick Start (for GEM-DXRP1)
1. Refer to the wiring diagram, connect Siren, Aux. Power,
PGM Output, Remote Bus, Earth ground, Zone and Tele-
phone wiring. NOTE: See Installation Instructions
(WI1691).
2. Connect AC power first and then the battery.
3. Configure the keypad (see page 42).
4. Access the Easy Menu Driven (Dealer Program) Mode:
Press 456789
w
Press NO (
q
) until “
ACTIVATE PROGRAM Y/N
” appears on the
keypad display.
Press YES (
p
) to Enter Dealer Program Mode. Go to page 5.
Quick Start (for GEM-DXK1)
1. Refer to the wiring diagram, connect Siren, Aux. Power, PGM
Output, Remote Bus, Earth ground, Zone and Telephone
wiring. NOTE: See Installation Instructions (WI1691).
2. Connect AC power first and then the battery.
3. Configure the keypad (see page 42).
4. Access the Easy Menu Driven (Dealer Program) Mode:
Press 456789
w
Press NO (
z
) until “
ACTIVATE PROGRAM Y/N
” appears on the
keypad display.
Press YES (
p
) to Enter Dealer Program Mode. Go to page 5.
Dealer Code
Dealer Code
™