NAPCO GEM-DXK1, Инструкция по программированию

Страница: 24 / 60

LIBRA LIB-P432EX Series Programming Instructions NAPCO Security Systems
Page 24
Default for Group Zone Report Codes depends on Easy Menu Question “RCVR. FORMAT”.
CS ZONE REPORTING OPTIONS (ADDRESS 0720-0751)
ADDRESS 0720-0727
CONTROL PANEL ZONES REPORT CODE
ZONE 1 ZONE 2 ZONE 3 ZONE 4 ZONE 5 ZONE 6 ZONE 7 ZONE 8
0720 0721 0722 0723 0724 0725 0726 0727
ADDRESS 0728-0731
ZONES REPORT CODE
ZONE 9 ZONE 10 ZONE 11 ZONE 12
0728 0729 0730 0731
ADDRESS 0732-0735
ZONES REPORT CODE
ZONE 13 ZONE 14 ZONE 15 ZONE 16
0732 0733 0734 0735
ADDRESS 0744-0747
ZONES REPORT CODE
ZONE 25 ZONE 26 ZONE 27 ZONE 28
0744 0745 0746 0747
ADDRESS 0748-0751
ZONES REPORT CODE
ZONE 29 ZONE 30 ZONE 31 ZONE 32
0748 0749 0750 0751
ADDRESS 0736-0739
ZONES REPORT CODE
ZONE 17 ZONE 18 ZONE 19 ZONE 20
0736 0737 0738 0739
ADDRESS 0740-0743
ZONES REPORT CODE
ZONE 21 ZONE 22 ZONE 23 ZONE 24
0740 0741 0742 0743
NOTE: If "Zone Doubling" (Address 1423) is not enabled, then Zones 1-4 are included in the control panel and Zones
5-32 are wireless Zones. If "Zone Doubling" is enabled, then Zones 1-4 and 9-12 are included in the control panel;
Zones 5 through 32 are available as wireless--however--Zones 9-12 would be ORed with the hardwired zones.
PULSE EVENT CODE will be the first digit of the 2 digit reporting code. The second digit will be the
second digit of the reporting zone. For example, for zone 9 (address 0728), if the right digit is “3", then
the reporting code is ”39". For example, for zone 15 (address 0734), if the right digit is “4", then the
reporting code is ”45".
MODEM CODES determine the zone types reported for the following formats: SIA and ADEMCO Point ID.
1. Select the desired Modem Code for each zone from the table shown.
2. Press
u
to save.
ZONE REPORT
CODE OPTIONS
DATA ENTRIES
DATA
ENTRIES MODEM CODE
LEFT
1 Fire
2 Panic
3 Burglary
4 Hold up
7 Gas Alarm
8 Heat Alarm
0 Auxiliary Alarm
B 24 Hour Auxiliary