Nanni Q1500 Series, Руководство пользователя

Страница: 55 / 98

55
S 07 MAINTENANCE
MAINTENANCE INTERVALS
COMPONENTS
PERIODICITY
Daily 25 hours
Every
250 hours
Every
500 hours
Every
1000
hours
Every
2000
hours
Fuel supply system
Water in fuel - Prefilter / Drain - Cartridge
Fuel filter
(
1
)
Injectors
Lubrication system
Oil level (
1
)
Engine oil (
1
)
Oil filter (
1
)
Cooling system
Cooling system level (
1
)
Coolant (
1
)
Thermostat control (
1
)
Pressurized plug (
1
) (
5
)
Heat Exchanger - O-rings (
5
)
Air cooler - O-rings (
4
)
Raw water system
Check and clean the raw water filter.
Raw Water Pump Impeller (
1
)
Zinc anodes (
1
)
Air intake and exhaust system.
Turbocharger control (
3
)
Free movement and oiling of the turbo valve (
3
)
Thermal protection of the turbocharger (
3
)
Intake air filter (
1
)
Exhaust elbow (
1
)
Electricity
Battery electrolyte level
Checking the connectors of the harness
Checking the alternator belt tension - Replacement (
1
)
Control panel: Indicator lights and alarms
Engine (generalities)
Flexible motor supports -Replacement
Condition of the hoses / clamps - Screws
Visual inspection (leakage of coolant, fuel, oil, sea water, etc...)
Tappet clearance
Alternator
Check all assembly screws/bolts (
2
)
Cleaning the cooling system (
2
)
Condition of the protective vents (
2
)
General cleaning (
2
)
(
1
) Operations must be performed in accordance with the operation and maintenance manuals for your engine. For all technical information specific to your engine, refer to the operation and maintenance manual.
(
2
) Operation to be performed in accordance with the manufacturer’s operation and maintenance manual.
(
3
) Only Q3300 & Q3800 are concerned
(
4
) Only Q3800 is concerned
(
5
) Q1100 series are out of scope
CHECK/ADJUST/CLEAN/MAINTAIN/REPLACE AS NEEDED
REPLACE