Nanni Q1500 Series, Руководство пользователя

Страница: 27 / 98

27
S03 FLUIDS
LUBRICANTS
ENGINE OIL AND FILTER SERVICE INTER-
VALS — TIER 3 AND STAGE IIIA — OEM
APPLICATIONS
Recommended oil and filter service intervals are based on
a combination of oil pan capacity, type of engine oil and
filter used, and sulphur content of the diesel fuel.
Actual service intervals also depend on operation and
maintenance practices.
Approved Oil Types:
• API CK-4, API CJ-4, API CI-4 PLUS, API CI-4, ACEA
E9, ACEA E7, ACEA E6, ACEA E5, and ACEA E4
Use oil analysis to evaluate the condition of the oil and to
aid in selection of the proper oil and filter service interval.
Contact your NANNI dealer or other qualified service pro -
vider for more information on engine oil analysis.
Change the oil and oil filter at least once every 12 months
even if the hours of operation are fewer than the other-
wise recommended service interval.
Diesel fuel sulfur content affects engine oil and filter ser -
vice intervals.
• Use of diesel fuel with sulfur content less than 1000
mg/kg (1000 ppm) is RECOMMENDED.
• Use of diesel fuel with sulfur content 1000—2000 mg/
kg (1000—2000 ppm) REDUCES the oil and filter ser -
vice interval.
• BEFORE using diesel fuel with sulfur content great -
er than 2000 mg/kg (2000 ppm), contact your NANNI
dealer or qualified service provider.
• DO NOT use diesel fuel with sulfur content greater
than 10 000 mg/kg (10 000 ppm).
IMPORTANT!
To avoid engine damage:
• Reduce oil and filter service intervals by 50% when
using biodiesel blends greater than B20. Oil analysis
may allow longer service intervals
• Use only approved oil types
Oil Pan Size (L/kW)
Oil pan ca -
pacity
Greater than
or equal to
0.10
Greater than
or equal to
0.12
Greater than
or equal to
0.14
Fuel Sulfur Less than 1000 mg/kg (1000 ppm)
Periodicity 250 hours 250 hours 250 hours
Fuel Sulfur 1000—2000 mg/kg (1000—2000 ppm)
Periodicity 200 hours 200 hours 250 hours
Fuel Sulfur 2000—5000 mg/kg (2000—5000 ppm)
Periodicity 150 hours 175 hours 250 hours
Fuel Sulfur 5000—10 000 mg/kg (5000—10 000 ppm)
Periodicity 125 hours 125 hours 125 hours
Oil analysis may extend the service interval of “Other Oils”,
to a maximum not to exceed the higher interval. Oil analysis
means taking a series of oil samples at 50-hour increments
beyond the normal service interval until either the data indi-
cates the end of useful oil life or the maximum service inter-
val.