Nanni Q1500 Series, Руководство пользователя

Страница: 28 / 98

28
S03 FLUIDS
DIESEL ENGINE OIL — TIER 3 AND STAGE
IIIA
Failure to follow applicable oil standards and drain inter -
vals can result in severe engine damage that might not be
covered under warranty. Warranties, including the emis-
sions warranty, are not conditioned on the use of NANNI
parts, or service.
Use oil viscosity based on the expected air temperature
range during the period between oil changes.
Oils may be used if they meet one or more of the following
standards:
• API Service Category CK-4
• API Service Category CJ-4
• API Service Category CI-4 PLUS
• API Service Category CI-4
• ACEA Oil Sequence E9
• ACEA Oil Sequence E7
• ACEA Oil Sequence E6
• ACEA Oil Sequence E5
• ACEA Oil Sequence E4
Multi-viscosity diesel engine oils are preferred.
Diesel fuel quality and fuel sulfur content must comply
with all existing emissions regulations for the area in
which the engine operates.
Oil Viscosities for Air Temperature Ranges
DO NOT use diesel fuel with sulfur content greater than 10
000 mg/kg (10 000 ppm).
OIL FILTERS
Filtration of oils is critically important for proper opera -
tion and lubrication. NANNI brand oil filters have been de -
signed and produced specifically for NANNI applications.
NANNI filters adhere to engineering specifications for
quality of the filter media, filter efficiency rating, strength
of the bond between the filter media and the element end
cap, fatigue life of the canister (if applicable), and pres -
sure capability of the filter seal. Non-NANNI branded oil
filters might not meet these key NANNI specifications.
Always change oil filters regularly as specified in this
manual