N&W Global Vending Krea, Установка - Использование - Обслуживание

Страница: 16 / 72

© by N&W GLOBAL VENDING S.p.A.
10
03 - 2011 3685 00
D
ispENsiNg uNiT
When cleaning the dispensing unit, it is recommended to
remove it from the machine.
-Remove the saw tooth screws and the fixing screws of
the unit;
- Unfasten the unit by acting on the fixing fins;
-Wash with a solution of neutral detergent, being par-
ticularly careful with the covers of the cup sensor and of
the unit lighting LEDs.
-Dry carefully and reassemble following the reverse
order
p
ErioDical clEaNiNg of THE coffEE uNiT
Each time the vending machine is loaded, or at least
every week, it is good practice to clean the external parts
of the coffee unit from any coffee residue and particularly
in the areas of the coffee funnel, of the filters and of the
scrapers
It is good practice to periodically remove the cover of
the infuser unit and the coffee funnel. Slide the funnel
towards the right in order to unfasten it from the doser
(see Fig. 13).
Wash and carefully dry the disassembled parts;
the coffee funnel can be removed by sliding it towards
the right so that it can be unfastened from the dosers.
Warning!
It is essential to reinstall the cover before restarting
the machine (see Fig. 13).
c
lEaNiNg of THE WaTEr supply TaNk
(Optional)
For the machines which use the water tank, it is neces-
sary to carry out, at least on a weekly basis, the sterilisa-
tion of the tank by using the sterilising products used for
the mixers.
Fig. 12
1- Fixing fins
2- Saw tooth screws
3- Sensors
4- Fixing screw
5- Unit lighting LED
6- LED power supply board
7- Cup sensor
Fig. 13
1- Coffee funnel
2- Filters
3- Scrapers
4- Unit cover
4
3
2
1
5
6
7
1
4
1
2
2
3
3