N&W Global Vending Krea, Установка - Использование - Обслуживание

Страница: 42 / 72

© by N&W GLOBAL VENDING S.p.A.
36
03 - 2011 3685 00
H
oT WaTEr sElEcTioN couNTiNg
Enables/disables the counting of the hot water dispens-
ing events from the stroke counter.
k
EyboarD lock passWorD
This function allows you to set the password (to be
entered with the door closed) for enabling/disabling the
selection keyboard lock.
When the keys are locked, the message “Service sus-
pended” appears on the display.
With the password set to 00000, the password is not
active.
c
up aDjusTmENT TimE
Function not available for this model.
E
NErgy saviNg
In order to save energy when the machine is not used, it
is possible to choose among the following energy saving
options:
E
NErgy
s
aviNg
:
With this option it is possible, in the time intervals which
are set with the function “Energy Saving Parameters”, to
suspend the service of the vending machine and switch
off or not the boiler.
The selections are not available for the whole duration of
the Energy Saving period.
- Sleep mode : with this option, after 15 minutes of
inactivity of the vending machine, the LEDs of the door
switch off and the temperature of the boiler decreases
to approx. 70 °C. When any selection button is pressed,
the machine restarts the normal operations and as
soon as the operational temperature is reached, the
selections become available again.
- Light off only: with this option it is possible to switch
off the lighting LEDs of the keyboard during the time in -
tervals set by the function “Energy Saving Parameters”
while the boiler continues to work normally. When any
selection button is pressed, the lighting of the keyboard
is reactivated and the machine immediately restarts the
normal operations.
E
NErgy
s
aviNg
p
aramETErs
With this function it is possible to set up to 4 time bands
during which the energy saving profiles will switch on
(Energy Saving and Soft Energy Saving).
To disable the time band, set the start and end times to
24.00.
E
NErgy saviNg passWorD
This function sets the password (to be entered with the
door closed) for restoring the machine's operation when
the "energy saving" mode is on.
Entering the energy saving password when the machine
is in normal user operation causes the machine to go
into energy saving mode.
With the password set to 00000, the password is not
active.
lED D.a.
ouT of sErvicE
It is possible to define whether the lighting LEDs shall
be switched on or not (red) when the machine is out of
service and the “Energy saving” mode is on .
s
ET DispENsiNg maiNTENaNcE
With this function it is possible to establish how many
dispensing tests can be made at each door opening. By
default, the value is set to 0 and there are no limitations
on the dispensing tests.
c
olD uNiT
iD
sETTiNg
This function is active if the cold unit is present.
It allows you to assign an identification number to the
cold unit (from 0 to 9) connected to the machine.
If there are several machines connected in series, the ID
numbers of the cooling unit shall be different.
m
asTEr
s
lavE
The machine control system is arranged for the connec-
tion in series with other vending machines.
s
ETTiNgs
This function allows you to set the hierarchies of the
master / slave1 / slave2 relationships between the con-
nected machines.
This machine can be configured as “Master”, therefore
assuming control of the second machine or as “Slave”,
therefore leaving the control to the other machine.
Furthermore, the numbers of the selections will be set,
with two digits (XX) or three digits (0XX; 9XX)
By default, the master/slave function is not enabled.
s
lavE
p
ricE
H
olDiNg
In case the Executive payment system is set in “Price
Holding” mode, with this function it is possible to set the
same mode also in the software of the slave machine.
r
ETurN virTual pricE
If the payment system is set with BDV and/or Executive
protocol and for combined or virtual selections (whose
relative menus are on the slave machines), with this op-
tion it is possible to establish whether to keep (OFF) or
not (ON) the partial amount, in case the second selec-
tion/dispensing should fail.
r
EsET
m
iNislavE
With this function it is possible to reset all the settings re-
lated to the master/slave function on the slave machine.