N&W Global Vending Krea, Установка - Использование - Обслуживание, Страница: 15 / 72

© by N&W GLOBAL VENDING S.p.A.
9
03 - 2011 3685 00
W
asTE coNTaiNErs
The waste containers can be easily extracted so that
they can be quickly emptied and cleaned.
For safety reasons, the containers can be handled only
when the door is open.
l
iquiD WasTE
When the appropriate float signals that the container is
full, the following message appears on the machine's
display:
FULL WASTE
and it is necessary to empty the liquid waste container.
For removing the liquid waste container, operate as fol-
lows:
-Grab the liquid waste container by the side, lift slightly
and pull towards you.
-Empty the container and wash it with a solution of neu-
tral detergent
W
asTE
The capacity of the coffee beans container, if the sup -
port cabinet is not used, is greater than the capacity of
the waste container.
After a number of dispensing events corresponding
to about 870 g (corresponding to the capacity of the
container), the machine will stop working and request
that the solid waste container be emptied by showing the
message
EMPTY CONTAINER
The machine will still work for dispensing instant drinks.
W
asTE rEsET passWorD
In order to reset the selections counter, it is necessary to
press some buttons in sequence (enter a password);
With the closed door, proceed as follows:
-Press and hold button no. 9 for two seconds
-The management software will ask you to enter a pass-
word (5 digits) and the keyboard adopts the numerical
values shown in the figure below.
Fig. 10
1- Container for gathering liquid waste
2- Cover fixing hooks
3- Container Cover
4- Solid waste container
5- Full waste float switch
6- Full waste float
Fig. 11
Buttons numeric value
3
2
1
4
5
6
LLLLLLL
LLLLLLL
LLLLLL
LLLLLLLL
LLLL
LLLLLLLL
LLLLLLLL
LLLLLLLLLLL
LLLLLLLLLLLLi
LLLLLLLLLLLLLLL
LLLLLLLLL
LLLLLLLL
+ -
LLLLLLLLL
LLLLLLL
LLLLLLLLLLLLi
0
1
2
3
5
6
7
8
4 9